Posted on Posted in Support for HP Printer Tagged , , ,

How to Fix HP Printer Ink System Failure?

In general HP printer ink related issue are start with 0X… and most of the time due to ink overflow, connection error or due to cartilage error you may receive ink failure error in HP printer. HP is a well-known brand and they provide time to time error support for each device they manufactured.

If you receive the cartilage error code in HP printer read our blog post to know how to fix HP Check Printer Cartridge Error Code. But if you are facing ink system failure issue you can follow the methods explained below to fix error codes with HP printer.HP Printer Ink System Failure

Steps to Fix HP Printer Ink System Failure Error Codes:

METHOD1: SOFT RESET HP PRINTER

Step1: Shutdown HP printer and disconnect all the cables including power source.

Step2: Wait for printer to get settle down.

Step3: Press power button for 60 seconds and wait for some time.

Step4: Connect the power cord and turn on the printer.

Step5: Connect all the cables and check if error is fixed.

METHOD2: CHECK INK LEVELS

Step1: Open the firmware panel of the printer.

Step2: In settings check for ink level.

Step3: If any cartilage is getting ink level low you can buy a new ink cartilage.

METHOD3: CLEAN CARTILAGE CONTACTS

Step1: Turn on the printer and set it to service mode.

Step2: Open printer door to access the ink cartilages and remove cartilage.

Step3: If orange tab is attached to the cartilage remove them.

Step4: Examine the vent area located at the top of cartilage if ink leakage found clean them.

Step5:Use lint free clean cloth to clean copper contact and debris.

METHOD4: CLEAN PRINT HEAD

Step1: Open the print head.

Step2: Clean print head using 10% portion of alcohol.

Step3: Wait for head to get dry.

Step4: Reinstall print head to the printer.

Call HP Support 1-800-431-457 to Reset HP Printer Ink System Failure Issues

If after following all the methods listed in the blog above you are not able to fix HP printer ink system failure issue contact HP support. To get in touch with HP printer support number Australia call toll free number +61 1800-431-457 to get online assistance. To get connected with HP customer support number call round the clock to get instant help.

Leave a Reply

Your email address will not be published. Required fields are marked *